Electrical data | |
---|---|
System wattage |
39 W |
Lamp wattage |
39 W |
ECG efficiency |
90 % |
Input voltage |
220…240 V |
Voltage range |
198…264 V |
Mains frequency |
50…60 Hz |
Line current |
|
Power factor λ |
0.95 |
Inrush current |
|
Max. no. of ECGs on circuit breaker 10 A |
17 |
Max. no. of ECGs on circuit breaker 16 A |
28 |
Max. no. of ECGs on 16A MCB with EBN-OS |
70 |
Protective conductor current |
0.1 mA |
Operating frequency |
0.100…0.120 kHz |
U-OUT |
250 V |
Max. working voltage between LH and LL |
250 V |
Max. working voltage betw. LL/LH & earth |
250 V |
Max. capacitance of wire ECG/lamp |
40 pF |
Ignition voltage |
3.0 kVp |
Dimensions & weight | |
Cable cross-section, input side |
0.5…1.5 mm² |
Cable cross-section, output side |
0.5…1.5 mm² |
Wire preparation length, input side |
8.5…9.5 mm |
Wire preparation length, output side |
8.5…9.5 mm |
Length |
97.0 mm |
Width |
43.0 mm |
Height |
30.0 mm |
Mounting hole spacing, length |
88.0 mm |
Mounting hole spacing, width |
34.0 mm |
Product weight |
105.00 g |
Colors & materials | |
Casing material |
Plastic |
Temperatures | |
Ambient temperature range |
-25…+50 °C |
Maximum temperature at tc test point |
80 °C |
Lifespan | |
ECG lifetime |
|
Additional product data | |
Design / version |
Built-in unit |
System guarantee level |
3c |
Capabilities | |
Overheating protection |
Power reduction and switch off at T > 80 °C at the tc point |
ECG reset time |
> 0.5 s |
Maximum wiring length ECG/lamp |
0.5 m |
Dimmable |
No |
Restriction on ignition time |
20 min |
Suitable for fixtures with prot. class |
I / II |
Certificates & standards | |
Approval marks – approval |
ENEC 10 / VDE / VDE-EMC / GHOST / C-Tick |
Type of protection |
IP20 |
EEI – Energy Label |
A2 |
Standards |
acc. to EN 61347-2-12 / acc. to EN 55015 / acc. to EN 61000-3-2 / acc. to EN 61547 |